top of page

Service and Repair of Scuba Equipment:

We Flowbench test all new and all repaired regulators before they leave the store.
Remember to have your equipment serviced annually to help extend its life, to keep it in warranty and to eliminate any surprises on your trips.
Regulator and 0ther Air Supply Services 

Complete Regulator Overhaul
$25.00 per stage plus parts - 100% disassembly and rebuild of 1st and 2nd stages with installation of new manufacturer recommended service kits.  All hoses and connections are checked.  Most manufacturers recommend an overhaul every 2 years.

Annual Regulator Cleaning Service
$45.00 plus parts - Complete internal and external inspection and cleaning where needed.  Intermediate pressure is checked and adjusted.  All rubber and silicone parts are checked, mouthpieces inspected and lubrication if needed.  Regulator is tested on flow bench for performance.  Overhaul may be needed.  Parts extra.

Regulator Function Test Only
$30.00 - A basic function check consisting of leak test, intermediate pressure check, free flow test and basic evaluation of breathing resistance is performed.

Regulator Oxygen Cleaning
$75.00 - Oxygen cleaning (for Nitrox use).

Cylinder Services

O-rings, valve parts, cleaning/drying, whipping and burst discs are not included in service prices. They are extra.

$25.00 - Visual inspection with air fill.

$35.00 - Same day / Next day visual inspection plus air fill.

$65.00 - Hydrostatic test with visual inspection plus air fill (2 - 3 week turn-around).

$20.00 - Cylinder Tumbling.

$50.00 - Cylinder Oxygen Cleaning (For Nitrox use).

Buoyancy Control Device (BCD) Service

$25.00 plus parts - Inflator is cleaned and lubricated.  Internal bladder is cleaned and treated with silicone rinse to increase longevity.  Exterior is checked for damage.  (Most manufacturers recommend BCD service every other year as a minimum guideline.)

You have taken a lot of time and made a substantial investment in selecting your scuba gear. Don't trust the servicing of your life-support equipment to just anyone. We take dive equipment service very seriously to ensure you the best in quality and satisfaction.

Dive Winnipesaukee has a professional Flowbench (pictured right) and experienced, qualified technicians to maintain and service your equipment. All staff technicians continually receive factory-authorized technical service education and use only  manufacturer's recommended parts and lubricants to insure that your equipment is returned to manufacturer's specifications. 

bottom of page